Whirlpool Washing Machine Error Code LOC โ How to Fix (Control lock activated)
Fix Whirlpool Washing Machine error code LOC. Step-by-step guide to diagnose and resolve the control lock activated on Whirlpool washing machines.
What Does Error Code LOC Mean?
Error LOC on your Whirlpool Washing Machine means: Whirlpool Washing Machine error code LOC indicates that the control lock is activated, preventing the washer from operating. This error usually occurs when the lock button is pressed and held for an extended period. The washer will not start or continue a cycle until the control lock is disabled.
What You'll Need
๐ง Tools
- Multimeter (for testing the control lock circuit)
- Phillips #2 screwdriver (for accessing the control panel)
- Torx T20 screwdriver (for removing the control panel)
๐ Parts
- Control Lock Button
How to Fix Error LOC โ Step by Step
- 1
Step 1: Check the Control Lock Button
Locate the control lock button on the Whirlpool Washing Machine's control panel. Check if the button is pressed and held. If it is, release the button and see if the washer starts. If the washer still doesn't start, proceed to the next step.
๐ก Pro Tip: Make sure to check the control lock button carefully, as it's easy to overlook.
- 2
Step 2: Reset the Control Panel
Press and hold the 'Cancel' button for 3 seconds to reset the control panel. This will clear any stored error codes, including the LOC error. Release the 'Cancel' button and see if the washer starts.
๐ก Pro Tip: Resetting the control panel can resolve the LOC error in many cases.
- 3
Step 3: Check the Control Lock Circuit
Use a multimeter to test the control lock circuit. Set the multimeter to the ohms function and measure the resistance between the control lock button and the control panel. If the resistance is within the specified range (usually 1-5 kฮฉ), the circuit is functioning correctly.
๐ก Pro Tip: Make sure to consult the Whirlpool Washing Machine's user manual for the correct resistance range for the control lock circuit.
- 4
Step 4: Replace the Control Lock Button
If the control lock circuit is functioning correctly, but the LOC error persists, it's likely that the control lock button is faulty. Remove the control panel using a Torx T20 screwdriver and locate the control lock button. Replace the button with a new one, making sure to secure it properly with the Torx T20 screwdriver.
๐ก Pro Tip: Make sure to purchase a genuine Whirlpool control lock button to ensure compatibility and proper function.
- 5
Step 5: Check for Faulty Wiring
If replacing the control lock button doesn't resolve the issue, it's possible that there's a fault in the wiring. Use a multimeter to test the wiring for any shorts or open circuits. If a fault is detected, consult the Whirlpool Washing Machine's user manual for instructions on how to repair or replace the wiring.
๐ก Pro Tip: Make sure to consult a professional if you're not comfortable with electrical repairs.
When to Call a Professional
If none of the above steps resolve the issue, it may be time to bring in a licensed repair specialist. This could be due to a more complex electrical issue or a faulty control panel.
Related Whirlpool Washing Machine Error Codes
More Whirlpool Troubleshooting Guides
- Whirlpool Washing Machine Error F2 E1 โ The F2 E1 error code on your Whirlpool Washing Machine indicates that a key or b
- Whirlpool Washing Machine Error F5 E1 โ The F5 E1 error code on your Whirlpool Washing Machine indicates a door switch e
- Whirlpool Washing Machine Error F5 E2 โ The Whirlpool Washing Machine error code F5 E2 indicates that the door is not lo